Instruction
Disassembling and assembling PAHT and PAHT G 256-308
13
180R9268 / 521B1236 / DKCFN.PI.011.B3.02 / 01.2015
6. Remove the flange when the remaining
three screws have been loosened. The
guide bolt must remain mounted.
5. If the flange does not move forward -
loosen the drain plug to empty the pump
from water by releasing vacuum.
8. Adjust the retainer plate to be parallel to
the end flange.
7. Carefully turn the flange and push it
backwards to make it rest on the housing
surface. Ensure not to scratch the swash
plate surface.
9. Screw the stop for the retainer ring into
the centre to keep the retainer ball in
place.
Drain
plug
Swash plate
surface
10. Carefully remove the pistons one by one.