Warranty
9.1 Warranty conditions
9.2 Unauthorized
changes
Always transmit the model number and serial
number with any claim filed regarding this
product. The product warranty may be void in
following cases:
• Absence of nameplate.
• External modifications, in particular drilling,
welding, broken feet and shock marks.
• Compressor opened or returned unsealed.
• Rust, water or leak detection dye inside the
compressor.
• Use of a refrigerant or lubricant not approved by
Danfoss.
• Any deviation from recommended instructions
pertaining to installation, application or
maintenance.
• Use in mobile applications.
• Use in explosive atmospheric environment.
• No model number or serial number transmitted
with the warranty claim.
NOTICE
Charging of refrigerant or oil not
specified by Danfoss as suitable for the unit will
lead to annulment of warranty from Danfoss A/S
side (if the refrigerant or oil are not approved
in writing by Danfoss). Annulment of warranty
from Danfoss side will also take place if the unit is
altered without written approval from Danfoss.
Warranty is governed by the Danfoss general
terms of warranty.
Warranty can also be rejected in case of
unauthorized modifications of the condensing
unit:
- Modification of electrical box.
- Modification of internal piping system of the
condensing unit.
- Direct changes of drive parameter setting
(all parameter changes should be limited to
controller setting changes. No changes allowed
on the drive itself).
- Replacement of drive, compressor, fan or other
components on the condensing unit by similar
components which are not Danfoss original
components or approved by Danfoss.
39
FRCC.PC.044.A6.02
Application Guidelines
