8 Appendix
8.1 Parameter Lists
The parameters are determined by parameter numbers. We
recommend using the alphabetical overview as a guide;
then you will be able to find detailed information very
quickly using the number or the link.
Changes during operation
“TRUE” means that the parameter can be changed, while
the frequency converter is in operation.
“FALSE” means that the frequency converter must be
stopped before a change can be made.
4-Set-up
“1-Set-up”: Data value will be the same in all set-ups.
Conversion index
This number refers to a conversion figure used when
writing or reading by means of a frequency converter.
Please see for all conversion indices the
VLT
AutomationDrive Design Guide, MG.33.BX.YY
.
Conversion index
0
Conversion factor
1
Data type
Please see for all data types the
VLT AutomationDrive
Design Guide, MG.33.BX.YY
.
Data type
Description
Type
2
Integer 8
Int8
3
Integer 16
Int16
4
Integer 32
Int32
5
Unsigned 8
Uint8
6
Unsigned 16
Uint16
7
Unsigned 32
Uint32
8.1.1 Application Parameters, Parameter Group 19-**
Par. No. #
Parameter
name
Parameter description
Default setting
Changes
during
operation
4-set-up
Conversion
index
Type
19-0* Application Parameters
19-00
Application parameters
0
'TRUE'
…
TRUE
19-89
Application parameters
0
TRUE
19-9* Read-only Application Parameters
19-90
Application parameter 90
0
read only
1 set-up
0
Int32
19-91
Application parameter 91
0
read only
1 set-up
0
Int32
19-92
Application parameter 92
0
read only
1 set-up
0
Int32
19-93
Application parameter 93
0
read only
1 set-up
0
Int32
19-94
Application parameter 94
0
read only
1 set-up
0
Int32
19-95
Application parameter 95
0
read only
1 set-up
0
Int32
19-96
Application parameter 96
0
read only
1 set-up
0
Int32
19-97
Application parameter 97
0
read only
1 set-up
0
Int32
19-98
Application parameter 98
0
read only
1 set-up
0
Int32
19-99
Application parameter 99
0
read only
1 set-up
0
Int32
Appendix
MCO 305 Operating Instructions
MG.33.K3.02 - VLT
®
is a registered Danfoss trademark
35
8
8
