Connector option
Code
Description
Detail
1
Terminal strip
Electrical connections are made to a set of four internal or more screw terminals
depending on the specific model.
2
Pigtail 1524 mm [60 in] without connector
Four wires extend from the handle case.
Reference
Potentiometer option
on page 14 for lengths.
3
Pigtail with unsealed Delphi connector
The wires from the case terminate in a Delphi environmental connector.
Reference
Potentiometer option
on page 14.
6
Pigtail with sealed Delphi connector, 4 pin male and
female
There are two separate connectors, each connects to a separate potentiometer.
7
Pigtail sealed Delphi connector
The wires from the case terminate in a sealed Delphi connector.
8
Pigtail sealed DEUTSCH connector
The wires from the case terminate in a sealed DEUTSCH connector.
Pigtail (or leadwire) is routed from the control handle to a Delphi environmental connector. Pigtail
minimum length is 381 mm [15 in].
For optional connectors, contact your Danfoss representative.
Suffix number
The factory generates these final three numbers. To create the suffix number, supply the following
information:
•
Supply voltage
•
Number of additional switches needed and actuation angle of each with respect to null
•
Full current output
•
Resistance of the driven load
•
Step current needed (if necessary)
For details regarding unique configurations, contact your Danfoss representative.
Technical Information
MCHXXX
Ordering information
©
Danfoss | February 2017
11022667 | BC00000033en-US0601 | 7