Danfoss JS6000, Electrical Installation Instructions, Page: 8 / 16

Hall effect sensor
Hall effect sensor pinout
12 pin connector, shaft position output 8 pin connector, microswitch and directional switch
output
Pin Function Pin Function
1 Hall 3 and 4 5 Vdc + supply 1 Common (joystick forward)
2 Hall 3 and 4 ground/0 volts 2 Forward switch output
3 Hall 1 and 2 5 Vdc + supply 3 Backward switch output
4 Hall 1 and 2 ground/0 volts 4 Common (joystick backward)
5 Hall 3 forward/backward output 5 Common (switch left)
6 Hall 2 left/right output 6 Left switch output
7 Hall 4 left/right output 7 Right switch output
8 Hall 1 forward/backward output 8 Common (switch right)
9 Not connected
10 Not connected
11 Not connected
12 Not connected
A-series grip
A-series pin assignments for both 12 and 16 pin connections.
•
Pins 13 to 16 are not used on the 16 pin connector
•
Blank = Pin not used
Refer to JS1000/JS6000 Joystick Grips Technical Information , 520L0872 for A-series grip option code
descriptions.
A-series grip pinout
A-Series
Option
Code Pin number
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A0RT Switch
out R Switch
out R Top
switch Center tap V+ VoutR V- Common
A100 PB1 Common
A10T PB1 Top
switch Common
A10D PB1 Operator
presence Common Operator
presence
A10B PB1 Top
switch Operator
presence Common Operator
presence
A1L0 Switch
out L Switch
out L PB1 VoutL Center tap V+ V- Common
A1R0 PB3 Switch
out R Switch
out R Center tap V+ VoutR V- Common
A1H0 Switch
out H PB2 Switch
out H VoutH Center top V+ V- Common
A1LD Switch
out L Switch
out L PB1 VoutL Center tap V+ Operator
presence
V- Common Operator
presence
A1RD PB3 Switch
out R Switch
out R Center tap V+ Operator
presence
VoutR V- Common Operator
presence
Electrical Installation
JS6000 Analog Output
Electrical installation
8 | © Danfoss | May 2017 BC00000013en-US | 0201