Danfoss JS6000, Electrical Installation Instructions

Page: 12 / 16

Joystick grip and Operator Presence switches wiring
Typical switch wiring
1 2
Grip switch:
1 PB switch connect to PLUS+1 ® device input pin
2 Common connect to either ground or 5 V sensor power +
Operator Presence switch:
1 Operator Presence connect to PLUS+1 ® device input pin
2 Operator Presence connect to either ground or 5 V sensor power +
Pin compatibility
PLUS+1
®
module pin type/JS6000 base potentiometer analog output pin compatibility
8 pin connector 16 pin connector Function
Not used Not used Power ground -
Not used Not used Power
1, 5 5, 7, 11, 13 Sensor power +
4 8 3, 9 Sensor power -
3, 6 4, 10 AIN/CAN0 shield
3, 6 4, 10 AIN/CAN1 shield
Not used 1, 2, 8, 14, 15, 16 DIN
3, 6 1, 2, 8, 14, 15, 16, 4, 10 DIN/AIN
3, 6 1, 2, 8, 14, 15, 16, 4, 10 DIN/AIN/FreqIN
3, 6 4, 10 AIN/Temp/Rheo
Refer to JS1000, JS6000 Grip Technical Information , 520L0872 for JS6000 base potentiometer analog
output 12 pin connector.
PLUS+1
®
module pin type/JS6000 base hall sensor analog output pin compatibility
8 pin connector
*
12 Pin connector Function
Not used Not used Power ground -
Not used Not used Power
1, 4, 5, 8 1, 3 Sensor power +
1, 4, 5, 8 2, 4 Sensor power -
Not used 5, 6, 7, 8 AIN/CAN0 shield
Not used 5, 6, 7, 8 AIN/CAN1 shield
2, 3, 6, 7 Not used DIN
2, 3, 6, 7 5, 6, 7, 8 DIN/AIN
2, 3, 6, 7 5, 6, 7, 8 DIN/AIN/FreqIN
Not used 5, 6, 7, 8 AIN/Temp/Rheo
*
Microswitch and directional switch connections.
Refer to JS1000, JS6000 Grip Technical Information , 520L0872 for JS6000 base hall sensor analog output
16 pin connector.
Electrical Installation
JS6000 Analog Output
Electrical installation
12 | © Danfoss | May 2017 BC00000013en-US | 0201