Code H: Electrical interface options
JS6000 product configuration model code H
H
J S 6 0 0 0
X Y
H M M
H
S
N L
N
J 3 3 1
1 2 3 4
Code H designates joystick output options.
JS6000 joystick base signal outputs are available in analog voltage, PWM, or Controller Area Network
(CAN) versions.
Analog
The analog output option gives a direct voltage output from the joystick’s shaft sensors, position
switches and grip functions. No signal conditioning is performed. The PWM output option provides a
conditioned output from the joystick’s shaft sensors, position switches, and grip functions. Output
characteristics are configured using the PLUS+1
®
Service Tool.
CAN 2.0B, J1939 protocol
The CAN J1939 output option provides conditioned joystick output information in 2.0B, J1039 message
protocol.
CANopen 2.0B, J1939 protocol
The CANopen output option provides conditioned joystick output information in 2.0B, CANopen
message protocol.
PWM
The PWM output option provides high voltage outputs for directly driving valves. The CAN port is active
on the PWM version, but it is not designed to be used on a CAN bus in a system with other devices. The
CAN bus is only to be used for configuration and data logging while connected to a PC running the PLUS
+1
®
Service Tool.
H1 electrical interface options
H1 electrical interface options
Code
Description
S
Analog voltage
J
CAN 2.0B, J1939 protocol
P
CAN 2.0B, CANopen protocol
W
PWM
H2, 3 joystick location/CAN source address
H2, 3 joystick location/CAN source address*
Code
Description
NN
None—use when H1 = S
33
Source address = 0x 33
34
Source address = 0x 34
Technical Information
JS6000 Joystick Base
Model code details
520L0760 • Rev 1102 • November 2015
19
