IKORE B maintenance tips
This product is designed for use in an industrial environment that may shorten the product's lifespan. Use
these tips to maximize the lifespan of the product.
•
Use the hook/belt provided with the transmitter to prevent the transmitter from falling
•
Do not clean the transmitter with solvents or pressurized water; use a damp cloth or soft brush for
cleaning
•
If the push buttons show signs of deterioration, contact the Authorized Technical Service for repair
•
Check if the battery contacts are correct, otherwise replace them.
•
Ensure that the product is supplied with AAA alkaline batteries or has a rechargeable battery
•
Be sure to recharge or replace battery regularly
Maintenance tips quick reference
Troubleshooting 2.4GHz
Color and frequency
Pulse frequency
Description
Action
Blue | fast pulses
Starting the system; establishing communications with
radio and EEPROM
Wait
Blue | continuous
Stand-by mode. Set up system, waiting user's action
Press START to enter operation
mode
Green | fast pulses
Attempting to link with the receiver and waiting its
answer
Wait
Green | continuous
Working
Operate
Green | slow pulses
Latency; no action has been taken for some time
Press START to return to operation
mode
Red | slow pulses
EEPROM module missing or corrupt
Check EEPROM and reprogram if
necessary
Red | double pulses
Radio error; radio communications error
Replace transmitter
Red | continuous
General hardware failure
Replace transmitter
Orange | slow pulses
Critical battery signal
Replace batteries with charged ones
Orange | double pulses
Activated maneuver
Release maneuver
User Manual
IKORE B Transmitter
Maintenance
©
Danfoss | May 2021
BC292582855621en-000201 | 9
