9
This feature allows the installer to
select a timed fan overrun following
each cooling demand. The unit is
pre-set to off . Using the
+
or
-
buttons
select your preference from off , 30,
60 or 90 seconds.
Press the
PROG
button to advance to
the next setting option.
Setting Fan Run-On After Cooling
(option 3)
or
+
-
This feature allows the installer or
the building owner to determine
the minimum deadband between
heating and cooling. The unit is pre-
set to 2°C. Using the
+
or
-
buttons
select your preference from 1°C, 2°C,
3°C or 4°C.
Press the
PROG
button to advance to
the next setting option.
Setting Heating/Cooling Deadband
(option 4)
or
+
-
Installa
tion Instruc
tions
GB
Summary of Contents for HC6110-3
Page 66: ...66 ...
Page 67: ...67 ...
Page 68: ...68 Part No 33088v06 05 08 www danfoss com BusinessAreas Heating ...
