Caution
The cooling appliance must be mounted
hanging vertically on a wall. that can support
the gross weight of the heating appliance. The
central distance for mounting holes is 530
mm. Pipe installation is carried out according
to the diagrams.
N
To prevent leaks ensure that there are no
stresses in the connecting pipes!
N
It is important that the heating and brine cir-
cuits are completely bled after installation.
N
Bleed valves must be installed where necessa-
ry.
Caution
Only spare parts approved by Danfoss Värme-
pumpar may be used for this appliance.
Installation Guide
Cooling module for domestic heat pump (Genesis platform),
Passive and Passive/Active
VIMAB102
Danfoss Heating Solutions
6