Danfoss Heating
9
GB
1.7 Before you change the preset programmes
Your installer will have set your unit to operate in one of the following
modes:
•
5/2 day
- one set of programmes for weekdays and another for
weekends
(page 10-11)
•
7 day
- diff erent settings for each day of the week.
(page 11-12)
•
24 hour
- one set of programmes for the whole week.
(page 12-13)
See INSTALLER SETTING tick box on inside fl ap label to ascertain
which mode your unit is set.
Please Note
The unit must be programmed in sequence. ON/OFF times cannot
be set out of sequence.
If you want to leave a preset time as it is, simply press
NEXT
to
move on to the next setting.
Your installer will have set your unit to programme either 2 or 3
ON/OFFs per day. If your clock has been installed to allow 3 ON/
OFFs and you do not wish to use one of the ON/OFF settings,
simply programme the ON time to be the same as the OFF time
and the setting will not operate.
INSTALLER SETTING
24 Hour
5+2 Day
7 Day
