1.
Disconnect the power supply for the machine and secure it
against unintentional restart.
2.
Have the power cable of the machine connected to the local
mains by a qualified electrician according to the regulations of
the Electricity Board.
3.
Check the electric motor rotational direction according to the ar-
row. Exchange outer cable (phases) of the connection, if requi-
red.
ATTENTION!
Risk of damage to machinery!
Operating the motor in the wrong direction of rotation results in
the loosening of the knife attachment.
• Ensure that the rotational direction of the motor is correct.
Observe the red arrow on the motor cover.
• If the motor has been operated in the wrong direction of rota-
tion, the securing nut and/or bolt has to be tightened as
described in Section 6 "Knife replacement".
Summary of Contents for ET9400
