3.
Fix the machine on the workbench using suitable screws in the
holes Ø10 (1)
Place the machine in a way so that it is easily accessible for
maintenance work from all sides.
4.
Check the machine for damage.
5.
Check the electric cables for damage.
6.
Train the operating staff and record training sessions in “Decla-
ration of trained staff”, Section 9.
WARNING!
Risk of injuries!
Machine components might loosen during transport. Such com-
ponents might be flung out during the cutting process. There is a
risk of being injured.
• Perform a cutting process in idle mode and without a work
piece.
• Check the machine for atypical noise.
Summary of Contents for ET9400
