Danfoss ET9400, Operator'S Manual

Page: 21 / 50

WARNING!
Risk due to increased load weights!
The machine has a weight of over 25kg.
• Transport the machine in twos.
• Use transport aids.
1. Lift the machine manually and transfer it to the relevant location.
4.2 Intermediate storage of machine/unit
If the machine/unit cannot be mounted immediately upon delivery, it
must be protected against:
•
Contamination,
•
Weather influences,
•
Mechanical damage.
The machine/unit components may only be stored in closed rooms
and under the following conditions:
•
temperature between 10°C and 35°C,
•
maximum air humidity 80% (non-condensating).
4.3 Commissioning
The machine is commissioned by the customer's fitter.
1. Lift the machine manually and place it on the optionally supplied
table.
2. Position the cutting plate flush with the table edge.