
WARNING!
Danger from falling loads!
Risk of injury from falling loads.
• Do not stand under suspended loads.
WARNING!
Danger from tilting machine/unit!
The machine/unit may tilt if it is transported improperly. There is a
risk of being injured.
• Consider the machine/unit's centre of gravity (1).
• Only lift the machine/unit at the designated points.
1.
Lift the machine/unit with a forklift, lift truck or crane at the desig-
nated points (2) and transfer it to the location of installation.
4.2 Intermediate storage of machine/unit
If the machine/unit cannot be mounted immediately upon delivery, it
must be protected against:
•
Contamination,
•
Weather influences,
•
Mechanical damage.
The machine/unit components may only be stored in closed rooms
and under the following conditions:
•
temperature between 10°C and 35°C,
•
maximum air humidity 80% (non-condensating).
4.3 Commissioning
The machine is commissioned by the customer's fitter.
1.
Place the machine on an even ground at the place of installa-
tion.
Summary of Contents for ET5070
