actual dimension an
d the specified dimension (see “Setting the
forming dimension
” in Section 5).
Open the crimping tool only so much that the hose may be placed
and/or removed easily. Excessive opening means risk of squee-
zing and time loss.
5.3.4 Remote automatic mode, via depth stop
WARNING!
Risk of squeezing!
When the die system closes, there is a risk of getting squeezed
between the die and the workpiece.
• Keep the feed opening for the workpiece as small as possi-
ble.
• Keep a minimum distance of 120 mm (A) to the die system.
1.
Switch on the
button to activate the depth stop.
2.
Insert the pre-assembled workpiece into the machine manually
and press it against the depth stop.
Summary of Contents for ET4500-002
