The micrometer (2) is used to change the final diameter of the die
system.
Crimping tool
The die system comprises base dies and crimping dies.
All base dies are mounted on sliding plates (1). The crimping dies are
plugged onto the base dies (3).
After the forming process, the base dies are pressed apart by the
pressure springs (2) when the tool opens. The bearing segments on
the front guide the base dies axially in the tool.
Accessories
The machine can be fitted with accessories. A list of the available ac-
cessories is included in the Annex, Section "Accessories".
3.2 Forming process
There is one type of forming:
•
Forming to a defined diameter
Forming to a defined diameter
This is the standard process for forming to produce hydraulic hoses.
The crimping tool closes until it reaches a pre-set diameter,
Summary of Contents for ET4100
