Danfoss ERC 211, Installation Manual, Page: 8 / 8

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Contact info.:
www.danfoss.com/erc
DKRCE.PI.RL0.P4.02 | 8 © Copyright Danfoss | Published by ADAP-KOOL | 2018.10 Installation guide | ERC 211
Installation guide - ERC 211
Parameter name - ERC 211 Code Min Max Unit
App. 0
(Def.)
App. 1 App. 2 App. 3 App. 4 App. 5
Readouts u--
Controller status
S0=cooling ON/Heating ON,
S2=wait for compressor ON time to
elapse, S3=wait for compressor OFF
time to elapse-restart time,
S4=drip OFF delay after defrost,
S10=cooling stop,
S11=cooling stopped by thermostat/
heating OFF, S14=defrosting state,
S15=fan delay state after defrost,
S17=door open (DI input),
S20=emergency cooling,
S25=manual control of outputs,
S30=continous cycle / Pull-down,
S32=delay of outputs at power up
u00 S0 S32 --
Air temperature (Sair) u01 -100.0 200.0 C/F ---
Read the present regulation
reference
u02 -100.0 200.0 C/F ---
DI1 input u10 oFF on ---
Status of night operation u13 oFF on ---
Condenser temperature (Sc) U09 -100.0 200.0 C/F ---
Compressor relay status u58 oFF on ---
Firmware version readout u80 000 999 ---
Alarm status
Sair air temperature sensor error E29
High temperature alarm A01
Low temperature alarm A02
High voltage alarm A99
Low voltage alarm AA1
Condenser alarm A61
Door alarm A04
Standby alarm A45
DI external alarm A15
N.B.: hidden parameters are greyed out
EU design registration
Safety standards
Check the input voltage is correct before connecting the instrument.
Do not expose to water or damp: only use the regulator within the design operating limits, avoiding sudden temperature
changes with high atmospheric humidity to prevent condensate forming.
Product disposal
The device (or product) must be disposed of in compliance with local waste disposal legislation.
002566703-0001