Danfoss ERC 211, Installation Manual, Page: 4 / 8

DKRCE.PI.RL0.P4.02 | 4 © Copyright Danfoss | Published by ADAP-KOOL | 2018.10 Installation guide | ERC 211
Installation guide - ERC 211
Danf
oss
80G141.01
Sair DI1 Sair DI1
APP 1/2/3 APP 4
DO1 DO1
Danf
oss
80G115.01
6 - Basic functions
Adjusting the setpoint temperature
Initiate a manual defrost
Initiate a pull down
View an active alarm
Unlock keyboard
(short press) SET : adjust the setpoint temperature.
UP/DOWN : change the temperature setpoint (in setting mode the setpoint flashes).
DEFROST : press for 3 seconds to initiate a defsost.
DEFROST : press for 3 seconds to stop manual defrost.
The DEFROST icon is shown during defrost.
PULL DOWN : press for 3 seconds to initiate pull down.
“ Pud ”: is shown for 3 seconds to indicate pull down.
The PULL DOWN icon flashes during pull down.
PULL DOWN : press for 3 seconds to stop pull down.
Temperature and alarm codes alternate flashes until the alarm is resolved.
The alarm bell is shown.
- After 5 minutes of inactivity, the keypad will be locked (if P76 = YES).
- When the keypad is locked, if any key is selected, “
LoC ” appears on the display.
- Press UP and DOWN buttons simultaneously for 3 seconds to unlock the keyboard. “unl” is displayed for 3 seconds.
SET : saves the temperature setpoint.
7 - Default application settings
App Mode Description Temp. Def. type Def. end
App 0
Cooling /
Heating
None (no preset application)
App 1 Cooling Medium temperature without defrost (4 – 20 °C) None None
App 2 Cooling Medium temperature with timed natural defrost (2 – 6 °C) Natural Time
App 3
Cooling Medium temperature with natural defrost stop on air temperature (2 – 6 °C) Natural Air temp.
App 4 Heating Heating thermostat (20 – 60 °C) None None
App 5
Cooling/
Heating
None (no preset application) with simplified parameter list
230 V AC 230 V AC