![background image](http://html1.mh-extra.com/html/danfoss/em-pmi540-t4000/em-pmi540-t4000_user-manual_3436468016.webp)
Connections and interfaces
1
Bearing temperature measurement connector, D-end (+BTMP option).
2
Anti-condensation heater connector , D-end.
3
Vibration sensor connection points.
In the D- end, one on the top and two on the sides.
4
Grease fill connection (nipple); D-end.
5
Lifting eyes.
6
Cooling system connections (bores).
7
Grease fill connection (nipple); N-end.
8
Power connection; cable gland (three glands per connection box).
9
Low voltage connector (measurement connector), low voltage grounding through the connector metal body.
10 Anti-condensation heater connector , N-end.
11 Foot mounting points/bores (total 4 points).
12 Enclosure (power) grounding points (one at each side).
13 Bearing temperature measurement connector, N-end (+BTMP1 option).
14 Air ventilation plug.
15 D-end flange mounting (12 connection bores around the flange).
16 Grease escape connections, D-end.
17 Shaft connection.
Grease escape connection in N-end not visible in the Figure.
Rating plate
Each electric machine has a rating plate which can be found on the machine frame. The rating plate
contains machine rating and identification. The rating values in the Figure below are not correct for this
machine. See the rating plate on the machine and data sheets for the correct values.
User Guide
EM-PMI540-T4000
Product overview
16 |
©
Danfoss | April 2023
BC265857716810en-000202