Danfoss EIM 365, User Manual

Page: 25 / 30

Setup
Table 33: Setup
→
Modbus
Label Description Min. Max. Value/
Type
Unit RW ADU Description
MBU Setup
→
Modbus
o03 Unit Addr 1 240 165 RW 41 Primary unit address is used when jumper KM7 is
mounted
UA2 Unit Addr 2 1 240 164 RW 42 Secondary unit address is used when the jumper
KM7 is not mounted
MBa MB Baud 0 2 1 - 19200 Enum 2 RW 43 Communication setting baud rate, 0=9600 , 1 =
19200, 2 = 38400
MPa MB Parity 0 2 2 - Even
parity
Enum 3 RW 44 Communication setting parity, 0 = no parity, 1 =
odd parity, 2 = even
MSB MB StopB 1 2 1 - 1 stop
bit
Enum 4 RW 45 Communication setting stop bit, 1 = 1 stop bit, 2
= 2 stop bit
Table 34: Setup
→
Valve
Label Description Min. Max. Value/
Type
Unit RW ADU Description
VAL Setup
→
Valve
n03 Valve type 0 17 16 - No
valve selec-
ted
Enum 9 RW 110 Select the type of Danfoss stepper motor valve
from the list. If you want to correct a Danfoss giv-
en valve profile. Then first select the relevant
valve and then select USER DEFINE. 0 = ETS 12.5
or 25 1 = ETS 50 2 = ETS 100 3 = ETS 250 4 = ETS
400 5 = USER DEFINE 6 = Saginomiya UKV 7 = ETS
6 8 = CCMT 2 4 8 9 = CCMT16 10 = CCMT24 11 =
CCMT30 12 = CCMT42 13 = CTR 14 = CCMT 0 15 =
CCMT 1 16 = No valve selected 17 = ETS Colibri
n37 Max steps 100 8000 240 RW 76 Maximum number of steps (384 x 10 microsteps
= 480 half steps)
n38 Max steps/sec 10 400 16 RW 77 Steps per second
n39 Start backlash 1 100 10 % RW 78 Backlash (steps) to close in percent at startup
(power on).
n40 Backlash 0 100 20 % RW 79 Backlash (steps) for spindle play compensation.
This is active during normal control
n56 Motor current 0 900 0 RW 80 Motor current
h22 Holding current 0 100 20 RW 109 Holding current
dcM Decay mode 0 2 0 - Fast Enum 10 RW 111 0 = Fast, 1 = Slow, 2 = Mixed
Table 35: Setup
→
Refrigerant
Label Description Min. Max. Value/
Type
Unit RW ADU Description
REF Setup
→
Refrigerant
RFG Refrigerant 0 49 0 - None Enum 5 RW 64 Refrigerant setting. 0 = None, 1 = R12, 2 = R22, 3
= R134a, 4 = R502, 5 = R717, 6 = R13, 7 = R13b1, 8
= R23, 9 = R500, 10 = R503, 11 = R114, 12 =
R142b, 13 = User, 14 = R32, 15 = R227, 16 =
R401A, 17 = R507, 18 = R402A, 19 = R404A, 20 =
R407C, 21 = R407A, 22 = R407B, 23 = R410A, 24 =
R170, 25 = R290, 26 = R600, 27 = R600a, 28 =
R744, 29 = R1270, 30 = R417A, 31 = R422A, 32 =
R413A, 33 = R422D, 34 = R427A, 35 = R438A, 36 =
R513A, 37 = R407F, 38 = R1234zeE, 39 =
R1234yf,40 = R448A,41 = R449A, 42 = R452A, 43 =
R450A, 44 = R452A, 45 = R454B, 46 = R1233zdE,
47 = R1234zeZ, 48 = R449B, 49 = R407H
RF1 Rfg. fac. A1 8000 12000 10428 RW 65 Adiabatic constant A1
RF2 Rfg. fac. A2 -4000 -1000 -2255 RW 66 Adiabatic constant A2
RF3 Rfg. fac. A3 2000 3000 2557 RW 67 Adiabatic constant A3
© Danfoss | Climate Solutions | 2022.09 BC415322248492en-000101 | 25
Superheat controller, type EIM 365 (PV01)