background image

10 

VIFZK102 

02/2007

The obligation of 

Danfoss 

will 

be to repair or supply a new unit, 
free of charge to the customer, 
whitout secondary charges linked 
to repairing the unit . In case of 
defective 

EFTM/EFSM 

thermo-

stats, 

Danfoss

 

reserves the right to 

repair the unit free of charge and 
without unreasonable delay to the 
customer .

The Danfoss warranty

 only covers 

connections made by authorised 
electricians and installations 
performed in accordance with 
the installation instruction, and 
does not cover faults caused by 
incorrect designs supplied by 
others, misuse, damage caused by 
others, or incorrect installation or 
any subsequent damage, that may 
occur . If 

Danfoss

 

is required to in-

spect or repair any defects caused 

by any of the above, then all work 
will be fully chargeable .

The Danfoss warranty

 is void, if 

payment of the equipment is in 
default .
At all times, we at 

Danfoss

 

will 

respond honestly, efficiently and 
promtly to all queries and reson-
able requests from our customers .

The above mentioned warranty 
concerns product liability whereas 
matters in relation to legislation 
on sale of goods shall be referred 
to national law .

Summary of Contents for EFET 160













Reviews: