ECtemp Next Plus HW
© Danfoss | Produced by FEC | 2020.10
AN347136888492-010101 | 49
PL
11 Blokada klawiatury
•
Gdy termostat jest włączony, aby zablokować klawiaturę
nacisnąć jednocześnie przycisk „ ” oraz „ ”. Na
wyświetlaczu pojawi się „ ”, powtórzyć operację, a funkcja
zostanie wyłączona.
12 Resetowanie
•
Po wyłączeniu termostatu nacisnąć przycisk „
” i
przytrzymać go przez 10 sekund. Na wyświetlaczu pojawiają
się wszystkie ikony, po zresetowaniu termostat włączy się
automatycznie. Resetowanie obejmuje programowane
wartości domyślne oraz wartości domyślne timera.
13 Temperatura ochrony przeciwzamrożeniowej
•
Kiedy termostat jest wyłączony, na wyświetlaczu pojawia się
komunikat „ ”, oznacza to, że funkcja zabezpieczenia przed
niską temperaturą jest włączona. Jeśli temperatura wody będzie
niższa niż 5 °C, automatycznie włączy się tryb ogrzewania z
oznaczeniem „
” oraz termostat połączy się z urządzeniami
grzejnymi; termostat wyłączy wyjście, gdy temperatura wody
przekroczy 7 °C.