ECtemp Next Plus HW
10 | © Danfoss | Produced by FEC | 2020.10
AN347136888492-010101
•
Heating Equipment Control: The thermostat will switch
on the heating equipment when the water temperature
2 degree lower than the setting temperature, the LCD will
display “
”; When the water temperature is equal with
setting temperature, the thermostat will switch off the
heating equipment. The icon “ ”will disappear.
8 Clock setting
•
Clock setting: Press “ ” till to display “hh:mm” and “hh”
flash, press “ ” or “ ” to adjust hour, press “ ”, “mm”
flash, press “ ” or “ ” to adjust minute; Press “ ”,
“week” flash, press “ ” or “ ” to adjust Mon to Sun.
9 Timer programming
•
Weekdays Setting: When thermostat at Programming mode,
setting in the first period: press and hold for 5 seconds “ ”
till to display “
Mo Tu We Th Fr
” and “hh:mm” and “hh” flash,
press “ ” or “ ” to adjust hour in the first period; press
“ ” till to display “hh:mm” and “mm” flash, press “ ” or
“ ” to adjust minutes in the first period; press “ ”, the
temperature flash and the figure is the setting temperature
of first period. When setting temperature is lower than
35 °C, it will display “
OFF
”. Using the above method to set
the hour and minute in other periods. Once the setting
time is over 16:00 at each period, it will switch to
weekend setting.
•
Weekend Setting: “Sa Su” showing is weekend setting, the
setting method is same with above.