MENU > Settings > Optimization
Total stop
1x021
Decide whether you want a total stop during the saving temperature period.
See Appendix “Parameter ID overview”
OFF:
No total stop. The desired flow temperature is reduced
according to:
• desired room temperature in saving mode
• auto saving
ON:
The desired flow temperature is lowered to the set value
in ‘Frost pr.’ The circulation pump is stopped but frost
protection is still active, see 'P frost T'.
Total stop = OFF
Total stop = ON
X
= Time
Y
= Desired flow temperature
= Comfort temperature
= Saving temperature
= Frost protection
The min. flow temperature limitation ('Temp. min.') is overruled when
'Total stop' is ON.
MENU > Settings > Optimization
Pre-stop (optimized stop time)
1x026
Disable the optimized stop time.
See Appendix “Parameter ID overview”
OFF:
The optimized stop time is disabled.
ON:
The optimized stop time is enabled.
Example: Optimization of Comfort from 07:00 - 22:00
X
=
Time
# 1#
=
Schedule
# 2 #
=
Prestop = OFF
# 3 #
=
Prestop = ON
# 4 #
=
Optimized start
# 5 #
=
Optimized stop
88 | © Danfoss | 2017.05
VI.LG.H4.02
Operating Guide ECL Comfort 210/296/310, application A230
