Danfoss DHP-M, Installation Manual

Page: 26 / 36

In order to use the Danfoss Online service:
▪
Make sure that there is an available internet connection (router or equivalent) in the building
▪
An account and registration is required to use the Danfoss Online service.
For more information, see:
www.documentation.heatpump.danfoss.com
▪
Make a note of the heat pump MAC-address. The MAC-address is available in the Network menu in the display
Bear in mind that firewalls, deficient connections etc. can cause problems that will prevent desired functionality. Some operators, munic-
ipal networks etc. does not allow traffic through their firewalls.
Contact the internet service provider or network administrator if there are any such problems.
Connecting to internet
Connect the commissioned heat pump to an existing internet connection (router or equivalent). Use the RJ45 connection placed below
the display (CM module) behind the front panel. Use a patch cable (not cross over cable).
Example below with no external network connection (for installations with only one secondary unit):
(This solution will NOT provide internet functionality. See next example if internet functionality, or router solution, is desired)
Ethernet cable: Standard Cat 5 network cable, RJ 45.
1 2
1. Primary (controlling) heat pump with IP address e.g. 192.168.0.100
2. Secondary heat pump with IP address e.g. 192.168.0.101
Example below with external network connection (for installations with one or more secondary units):
3 4 5 6
1
2
8
7
1 Router/Switch
2 Possibility of internet access via router
3 Primary (controlling) heat pump with IP address e.g.
192.168.0.100
4 Secondary heat pump with IP address e.g. 192.168.0.101
5 Secondary heat pump with IP address e.g. 192.168.0.102
6 Secondary heat pump with IP address e.g. 192.168.0.103
X Secondary heat pump with IP address e.g. 192.168.0.XXX
7 Online Web server and database
8 Online web browser
Installation Guide DHP-M
VIJSW102 Danfoss Heating Solutions
26