5.5
Adjusting the indoor temperature
Comfort adjustment, to change temperature
On the start screen, "comfort adjustment" of the indoor temperature may be done very easily.
Press
or
, alternatively drag clockwise or anticlockwise to raise or lower the temperature.
Each step represents an increase/decrease of approximately 1°C of the indoor temperature depend-
ing on comfort factor settings.
5.6
Adjusting the Heat Curve
The Curve indicator has two modes that can be toggled by pressing the Curve indicator symbol.
40
When lit, the curve is adjusted as one unit.
40
When not lit, individual curve points can be moved separately.
1. Press
on the Start screen to open the Menu screen.
2. Press
3. Press
if the Heat curve is not shown.
4. There are two ways of adjusting the heat curve:
▪
If the Curve indicator
40
is lit, press or to adjust the entire curve.
Or:
▪
If the Curve indicator
40
is not lit individual points can be moved separately by pressing
and to the desired temperature.
5. Confirm the new selection by pressing
Commissioning
DHP-H Varius Pro+/DHP-L Varius Pro+
VIJSG202
Danfoss Heating Solutions
16