Danfoss Heating
13
GB
5.4 Alarms
If an error occurs in the CF2 system, it is indicated by the Master
Controller and directly on the Remote Controller Display:
When the alarm is acknowledged with OK, the Buzzer of the Master
Controller will go Off (if set to Sound On, see chapter 5.3), and the
CF2 system will switch to
Alarm status
as indicated on the start-up
screen:
This indication of
Alarm
on the Remote Controller and the indication
on the Master Controller will continue until the error that caused the
alarm has been fi xed.
An
Alarms
menu will be present at the top of the Menu list activated
from the start-up screen:
