Danfoss C67, User Manual

Page: 79 / 84

The yellow
side of the
ECL Card
Go to display C.
Circuit I / II: Setting the desired room temperature
0 2
Desired room
temp. in
comfort mode
6 1
Desired room
temp. in
setback mode
Select the constant comfort mode.
Set the desired room temperature for the comfort
mode.
Select the constant setback mode.
Set the desired room temperature for the setback
mode.
Select the desired mode (section 2).
The setting of the desired room temperature is important even if
a room panel / remote control is not connected.
Is the room temperature too low?
Make sure that the radiator thermostat does not limit the room
temperature.
If you still cannot obtain the desired room temperature by
adjusting the radiator thermostats, the flow temperature is too
low. Increase the desired room temperature.
Setting the desired DHW charging temperature
Choose the DHW charging settings by pushing
the button until there is no circuit indication
(display / lights).
0 7
Desired DHW
charging temp.
in comfort mode
0 1
Desired DHW
charging temp. in
setback mode
Select the constant comfort mode.
Set the desired DHW charging temperature for
the comfort mode.
Select the constant setback mode.
Set the desired DHW charging temperature for
the setback mode.
Select the desired mode (section 2).
Set your room and DHW
charging temperature
3