Installa
tion
The ECL Comfort controller is a universal controller that can
be used for various systems. Based on the shown standard
systems, it is possible to configure additional systems.
In this section you find the most frequently used systems. If
your system is not quite as shown below, find the diagram
which has the best resemblance with your system and make
your own combinations.
The functions can only be realized with ECL Comfort 300 and as of
controller version 1.08.
10.1
Two indirectly connected heating systems
and secondarily connected storage tank
with built-in heating coil
System settings
Circuit Line Description
Recomm.
setting
I
17
Influence on desired flow temp.
OFF
I
43
Priority or parallel operation
99
I
51
DHW charging pump /
changeover valve
OFF
I
53
Desired flow temperature at
DHW charging
OFF
I
67
Adaptive function of S2 flow
temperature during DHW
charging
OFF
I
140 Function of temperature sensor
S5
0 (1)
I
152 Max limitation temperature at
sensor S2 during DHW charging
90
System diagrams in this instruction are principal drawings and do
not contain all components which are necessary in your systems.
Identifying the system type
10a
Summary of Contents for C67
Page 4: ......
Page 15: ...Installation 11b...
Page 23: ...Installation...
Page 45: ...Control overviews...
