AK-PI
100
Manual RS8FB102 © Danfoss 03-2008
7
Overview of functions in the
AK-PI 100
Example of IP addresses
Examples of controller addresses
The overview display will show the following:
• Status of alarm transmission
• Date and time
• Quality of the signal for communication with the Woodley MDM
unit or to Woodley TPI unit (the value is always 0 if the service
tool is attached).
The configuration display gives access to the following:
• The configuration lock is used with the following settings:
- Communication setting (MDM or WTP)
- Address offset setting (addresses are configured for all units on
the communication line. If these address values conflict with
other addresses, the entire connected group can be “offset”. For
example a group of units has the addresses 20 to 31. By setting
“Address offset” to 50, the address will become 70 to 81 in the
AK-SC 255. This removes the need to change the addresses of
the existing units).
- Adjustment of a static IP address.
• In “System setup” you can give the unit a name
• You can change the IP setup
