6
Manual RS8FB102 © Danfoss 03-2008
AK-PI
100
All controller types and software versions will require a
description file. Select the relevant file.
If the file is not listed, it must be uploaded to the AK-SC 255.
Contact Danfoss.
Define the setup of the Woodley units
Switch to the displayed screen with:
Communications / Refrigeration / Add Controls
Specify the description file:
• Select No for “Pack controller”
• Select the number of controllers (in this example 10)
• Click the “Setup” button to switch to the next screen
• Click “Edit” on the first controller type (in the “Type” field)
• Select the description file matching the controller.
Configure the data in the unit:
• Go back to the overview screen for all Woodley units
• Press “Setup” for the relevant controller type
• Set the address. This is the address the unit is set to + any
“address offset value”
• Edit the name if necessary
• Change the settings.
