background image

Menu operation   RC8CC202  ©  Danfoss  09/2012 

AK-LM 330 Vers. 1.4x

DE-DB

 

 

AKS 32 -20 defined with setting = 10

 

 

AKS 32 -34 defined with setting = 13

 

 

AKS 32 -50 defined with setting = 16

 

 

AKS 32R -6 defined with setting = 2

 

 

AKS 32R -9 defined with setting = 5

 

 

AKS 32R -12 defined with setting = 8

 

 

AKS 32R -20 defined with setting = 11

 

 

AKS 32R -34 defined with setting = 14

 

 

AKS 32R - 50 defined with setting = 17

 

 

AKS 2050 -59 defined with setting = 31

 

 

AKS 2050 -99 defined with setting = 32

 

 

AKS 2050 -159 defined with setting = 33

 

 

User-defined defined with setting = 0. + settings via Service Tool.

 

Do for Paux 2.

Alarm priorities

Measurements 

AK error 

When “ON”, the controller is in alarm condition.

 

 

Settings 

Main switch 

Main switch: 

ON:  Regulation

 

 

 

OFF:  Controller stopped

 

 

 

The alarm priority of the following alarms can be changed:

 

 

High priority is defined with setting = 1

 

 

Medium priority is defined with setting = 2

 

 

Low priority is defined with setting = 3

 

 

Overriding the alarms is defined with setting = 0

 

Stand by mode 

(Interrupted regulation) See the above introduction

 

Saux 1 error 

See the above introduction

 

2,3,4,5,6,7,8 

As for Saux 1

  

 

Paux 1 error 

See the above introduction

 

2,3,4,5,6,7,8 

As for Paux 1

 

 

DI1 

See the above introduction

 

2,3,4,5,6,7,8 

As for DI1

  

 

Th.1 High alarm 

See the above introduction 

 

Th 1 Low alarm 

See the above introduction

 

2,3,4,5,6,7,8 

As for Th. 1

 

 

P1 Low alarm 

See the above introduction

 

P1 High alarm 

See the above introduction

 

As for P1

 

V1 High alarm 

See the above introduction

 

V1 Low alarm 

See the above introduction

 

As for V1

 

 

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products 

already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Summary of Contents for AK-LM 330









Reviews: