Interface Inc.
●
7401 East Butherus Drive, Scottsdale, Arizona 85260 USA
●
Phone 480.948.5555
●
Fax 480.948.1924
www.interfaceforce.com
●
Email:
●
ORDER TOLL-FREE 800.947.5598
9
Connection of full bridge with M12 version
The following graphic shows the connection of a full bridge for the M12 version.
Connection of half bridge with M12 version
The following graphic shows the connection of a half bridge for the M12 version.
The bridge extension should be adapted depending on the application.
Please set the solder bridges:
•
HB1 when using channel 1
with a half bridge.
•
HB2 when using channel 2
with a half bridge.
•
HB3 when using channel 3
with a half bridge.
•
HB4 when using channel 4
with a half bridge.
Solder bridges: Figure 3: Solder bridges for
configuring bridge extensions
see page 11
