Interface Inc.
●
7401 East Butherus Drive, Scottsdale, Arizona 85260 USA
●
Phone 480.948.5555
●
Fax 480.948.1924
www.interfaceforce.com
●
Email:
●
ORDER TOLL-FREE 800.947.5598
12
Altering from mV/V input to a voltage input
Opening the device
1.Remove both screw covers from the input side and remove the fastening screws from the
front cover.
2.The two hexagonal bolts on the 37-pin D-Sub port must be loosened using a socket
spanner (5 mm).
3.The printed circuit board is pulled out on the side of the 25-pin D-Sub port.
