Dane Technologies BSC4D, Operating Instructions Manual

Page: 27 / 32

Interface Inc.
●
7401 East Butherus Drive, Scottsdale, Arizona 85260 USA
●
Phone 480.948.5555
●
Fax 480.948.1924
www.interfaceforce.com
●
Email: contact@interfaceforce.com
●
ORDER TOLL-FREE 800.947.5598
27
set_tx_status (0x28<p1>) can be used.
Parameters in
HEX Parameters in Bit Current After switching on
00 0 0 0 0 0 0 0 0 Send measured value
OFF Send measured value OFF
01 0 0 0 0 0 0 0 1 Send measured value
OFF Send measured value ON
02 0 0 0 0 0 0 1 0 Send measured value
ON Send measured value OFF
03 0 0 0 0 0 0 1 1 Send measured value
ON Send measured value ON
Send: 0x23
Send: 0x29
Receive : 0x 3B 29 01 00 01 30 33 33 01 0D 0A
Result: Current-OFF , After switching on-ON
Send: 0x28 02
Send: 0x29
Receive : 0x 3B 29 01 00 01 30 33 33 02 0D 0A
Result: Current-ON , After switching on-OFF
Digital IOs
The entire port is always read (IO8 to IO1).
-4Example: Read port
Send: 0x23
Send: 0xB9
Receive : 0x 3B B9 01 00 01 30 33 33 00 0D 0A
Result: all inputs and outputs are “low”
Parameters in
HEX Parameters in Bit Port
00 0 0 0 0 0 0 0 0 IO8 IO7 IO6 IO5 IO4 IO3 IO2 IO1
The digital port can be configured with set_digital (0xB6 <p1><p2>) and
set_digital_on_off(0xB8 <p1> <p2>). The port is set with <p1>/
set_digital (0xB6 <p1> <p2>)
Parameters in HEX <p2> Description