A
·
X
·
U
·
M User Manual
Version 2.5 - 2011-01-28
AXUM from D&R - Phone: +31 294 418014 - E-Mail:
- 20 -
6.1.3
Mix buss configuration
You have to setup the busses to create the names, console assignment and functionality of the
Busses. Here we see the setup for a single console buss setup:
Figure 8: Buss configuration
•
Label
The name given to this buss.
•
2 Mono busses
It is possible to make 2 mono busses from one stereo buss. All buss-sends, to this buss, on
the module’s will now include stereo to mono summing.
•
Master pre/post
You can choose the buss to be pre or post
ON
,
level
(comparable with pre/post fader) and
balance
(could be your pan-pot).
•
Master level/state
This setting is used as programmed startup level, so the buss masters are in a known state.
•
Interlock
If you make a buss interlock, only 1 module can be assigned at the same time.
•
Exclusive
When routing to an Dump/Rec exclusive buss is made, the routing to all other busses on that
module will be disabled. This is useful for a so called ‘dump buss’.
The selections Comm technician and Comm producer are used if you want to make a
communication buss. Such buss makes it possible to let presenters talk with hybrid or to talk
with an technician/producer.
•
Buss reset
This setting can be used to create a CUE/PFL buss with auto-reset (CUE Reset).
If you have multiple studios and CUE/PFL busses you may assign reset to multiple busses.
•
Console
You can select to which console a buss belongs.
