212-0019-IQ 7
MAINTENANCE
The ENFORCER™ 6201 series have been designed to provide trouble-free service. If problems are en-
countered, please see the Trouble-Shooting guide following below. If the problems persist, contact D&R
Electronics for further advice.
D&R Electronics will repair or replace (at manufacturer’s discretion) any unit under warranty that is found
to be defective with normal use. Units out of warranty can be repaired by D&R for a nominal charge on
either a flat rate, or parts and labor basis. Contact D&R for further details.
TROUBLE –SHOOTING
NOTE:
If ANY problem persists, please contact our service department.
PROBLEM
POSSIBLE CAUSE
PROBABLE SOLUTION
No output.
Siren is not connected to
power source.
The switch box harness has
loose wires.
Electronic fuse (20A) is
blown.
Ensure secure connection of the 9pin con-
nector.
Ensure secure connection of the harness at
both ends.
Replace fuse with same rating if blown.
-fuse location (internal).
Functions work but there is
no sound output.
Poor speaker connection.
Blown speaker.
Ensure secure connection of speaker
wires.
Check and replace speaker if necessary.
Siren tone does not operate
when it is selected.
Siren is not connected to
power source.
The switch box harness has
loose wires.
Ensure secure connection of the 9pin con-
nector.
Ensure secure connection of the harness at
both ends.
