212-0019-IQ 3
WARNING
All devices should be mounted in accordance with the manufacturer’s instructions and securely
fastened to vehicle elements. The unit should be mounted using permanent installation meth-
ods. Do NOT mount the system in a location that will interfere with the air bags. (For safe
equipment mounting zones in your vehicle, consult your vehicle manufacturer's recommended
guidelines.) It is the installer’s responsibility to ensure that the unit, mounting hardware, and
electrical wiring does NOT interfere with the air bags, and SRS wiring and sensors.
INSTALLATION & MOUNTING
The ENFORCER™ 6201-IQ series sirens can be mounted in a variety of places. They can be console
mounted with #10 screws as shown in figure below..
While installing the unit, refer to the Wiring & Adjustments section on page 4, and the Wiring Diagram on
page 5 to ensure proper installation of the equipment.
MOUNTING THE ENFORCER
TM
6201
Figure 1: MOUNTING DIAGRAM
