Z5458 AL Base plate
1.1 Safety
1.1.1 Intended use
The Z5458 AL Base plate must only be used in conjunction with
the d&b A-Series AL60/AL90 and ALi60/ALi90 cabinets, as
described in this manual.
1.1.2 General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Chapter 4 "Care and maintenance"
1.1.3 Load safety information
NOTICE!
The Z5458 AL Base plate is designed to stack a total of 3 x AL60/
AL90 or ALi60/ALi90 cabinets either directly on the ground or on
top of applicable subwoofer.
1.2 Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty.
d&b Code
Description
1
Z5458
d&b AL Base plate
[1]
Including:
1
Hand bolt M20 x 25
[2]
1
Locking pin 5 x 35 mm
[3]
1
AL Splay link
[4]
All items are undetachably attached to the plate using steel wire
ropes.
1
D2748.EN .01
Z5458 Rigging manual
1 Z5458 AL Base plate
d&b Z5458
AL Base plate Rigging manual 1.1 en
4
