d&b audiotechnik DS100, Manual

Page: 6 / 20

Power supply
Universal range switched mode power supply
Mains connectoin
IEC type socket
Rated mains voltage 100 to 240 V, 50 – 60 Hz
Nominal power 400 W
Power consumption 200 W (max)
Thermal and Environmental conditions
IP class IP20
Operating temperature range 0 °C to 50 °C
32 °F to 122 °F
Storage temperature range –20 °C to 70 °C
–4 °F to 158 °F
Operating humidity range (rel. non-condensed) 10% to 85%
Storage humidity range (rel. non-condensed) 15% to 90%
Fan noise emission
Idle (@ 22 °C / 71.6 °F) 36 dB(A)
Full load (@ 22 °C / 71.6 °F) 42 dB(A)
Full load (@ 50 °C / 122 °F) 54 dB(A)
Dimensions and weight
Height x width x depth 3 RU x 19" x 481 mm
3 RU x 19" x 18.93"
Weight 11.2 kg / 24.7 lb
Connections
ETHERNET 1 x RJ 45
LAN 100/1000 Mbps
OCA/AES70
OSC
SNMP
AUDIO NETWORK Dante audio network/AES67
2 x RJ 45 for Dante Primary/Secondary
Gigabit only
USB USB 3.0 port
Controls and indicators
Mains power switch Rocker switch on rear panel
POWER Push-button switch with integrated ring-LED indicator
Boot time Appr.: 45 sec.
I/O
Sample rate for I/O 48 kHz
Inputs 64
Outputs 64
Latency
Dante In to Out < 1.5 ms @ 48 kHz
plus Dante network latency
Input processing
Gain –120 dB ... +24 dB
Polarity 0 °/180 °
EQ 8-band PEQ with high/low shelf
Delay Up to 500 ms
Mute On / Off
Matrix processing
Crosspoint Mute On / Off
Crosspoint Level –120 dB ... +10 dB
Crosspoint Delay Up to 500 ms
Output processing
Gain –120 dB ... +10 dB
Polarity 0 °/180 °
EQ 16-band PEQ with high/low shelf
Delay Up to 500 ms
Mute On / Off
En-Scene
Input sources Up to 64
Positioning Static or dynamic (moving)
Control Manual or external
External control OCA/AES70 and OSC
En-Space
Convolvers Up to 144
Impulse response length Up to 10 seconds
3. Technical specifications
d&b DS100 Manual 1.3 en 6