8.1. EU declaration of conformity (CE symbol)
This declaration applies to:
d&b DS100, Z4100
All products of type DS100 starting from variant Z4100 .000 are
included, provided they correspond to the original technical
version and have not been subject to any later design or
electromechanical modifications.
We herewith declare that said products are in conformity with the
provisions of the respective EC directives including all applicable
amendments.
A detailed declaration is available on request and can be ordered
from d&b or downloaded from the d&b website at:
www.dbaudio.com
.
8.2. WEEE Declaration (Disposal)
Electrical and electronic equipment must be disposed of separately
from normal waste at the end of its operational lifetime.
Please dispose of this product according to the respective national
regulations or contractual agreements. If there are any further
questions concerning the disposal of this product, please contact
d&b audiotechnik.
8.3. Licenses and Copyright
This device includes software components released under different
open source licenses. These components are supplied together with
the d&b firmware.
A list of the components and a full-text version of all licenses and
copyrights can be accessed using the Web Remote interface as
described in
Þ
Chapter 5. "Initial setup" on page 14.
Þ
Selecting the d&b logo at the top left of the «Web Remote»
interface page allows access to the
«Software licenses and copyright» information page.
This page provides an overview of the open source software used
in this product. As required by the GPL and LGPL licenses, we will
send you a copy of the used source code on request. If you would
like to obtain a copy, please contact us by mail to:
d&b audiotechnik GmbH
Eugen-Adolff-Strasse 134, D-71522 Backnang, Germany
T +49-7191-9669-0, F +49-7191-95 00 00,
or by email at:
8. Manufacturer's Declarations
d&b DS100 Manual 1.3 en
19
