4.4.3. ETHERNET indicators
Status LEDs [8]
Link status / activity LED
Indicates an established link; flashing indicates link activity.
Gigabit link status LED
Indicates an established Gigabit Ethernet link.
4.4.4. AUDIO NETWORK indicators
Dante audio network indicators [9.1/9.2]
Link status / activity LED:
Green indicates an established link; flashing indicates link
activity.
Gigabit link status LED:
Orange indicates an established Gigabit Ethernet link.
Status LEDs [9.3]
The status LEDs indicate the system and clock sync status:
SYS
Indicates the status of the Dante system.
The SYS LED illuminates yellow while the system is
booting. If it remains illuminated, the system has failed to
boot correctly.
The SYS LED color will change to green when the system
has booted successfully and is operating properly.
SYNC
Indicates the clock synchronization status of the Dante
device.
Illuminates green to indicate that the device is a Dante
PTP clock slave and is synchronized to the PTP master.
A flashing green light indicates that the device is the
Dante PTP clock master.
Illuminates orange to indicate a network synchronization
error. Obtaining network sync may take up to 45
seconds.
All LEDs flashing green -
All LEDs flash green when the
Identify function has been
activated using Dante Controller.
All LEDs illuminating red -
If all LEDs illuminate red, this indicates that the Dante system has
detected errors when booting and has entered failsafe mode.
To restore a device that has entered failsafe mode, use the Dante
Firmware Update Manager (available from the d&b website at
www.dbaudio.com
).
d&b DS100 Manual 1.3 en
13
