Site 6/8
Copyright: www.dancar.dk
Note
If the inner section of spindel
is round, adaptor must be
modified.
Please modify the adaptor by removing the
first 30 mm
.
of the hex-curves. (use cutter drill)
This makes it possible for the adaptor to fully insertion.
6 pcs. hex-curves to be removed
Type of spindle with
round
attachment
Type of caravan with
skirts (Kabe)
Note:
Not all type of caravans with
skirts are suitable for Elfoot
installation.
In case of emergency operation of the stabiliser
leg, it is essential to have enough space to
be able to remove the adaptor.
Please cut away the innnersection of the
plastic guide tube.
With a mini saw, please
remove the funnel part
of the adaptor. Please save
the spring groove.
Spring groove
Saw
After modification, please check
final distance with fully closed
steady leg.
1 pcs. Bolt 10x45 mm
2 pcs. Washer 2x30 mm
1 pcs. Nut (locking)
Nb. These part are not included
Place bolt on this
location.
This modification make the stady leg stop 35 mm prior fully closed.
This prevent the stady leg to stuck against chassisplate.
Adria
among others!
Modification to prevent stucking
min. 35 mm distance
Chassis plate
