OPERATING INSTRUCTIONS
4
LIGHT INSTALLATION INSTRUCTIONS
The grow light system will ship inside the appliance
and must be installed by the end user.
1. Remove the light system from the box and
remove any packaging.
2. Connect the wire coming from the back of the
light system to the receptacle on the back wall of
the appliance.
3. Slide the light system into the two “L” shaped
brackets installed on the ceiling of the cabinet.
To remove the light system, first disconnect the light
from the receptacle and then push the end of the “L”
shaped bracket down and slide the light out.
CONTROL PANEL
The control panel is located on the control box on
the upper right side of the cabinet.
1. Up arrow:
Press and hold the up arrow for 5
seconds to manually turn the light system on or
off. Press again to resume normal functioning.
2. Down arrow:
Press and hold the down arrow
for 5 seconds to manually turn the fan on or off.
Press again to resume normal functioning.
3. Display screen:
The display screen will show
the current internal temperature and the timer
settings.
4. Set button:
The set button is used to set the timer
function.
5. °C/°F indicator lights:
The light will illuminate
to indicate which temperature scale is being
displayed. To change the temperature scale,
press the set button. The default setting is
Fahrenheit.
1
2
3
4
5
