background image

CARE & MAINTENANCE

7

AIR FILTER

The fi lter indicator will illuminate after 250 hours of 

use, indicating that the fi lter should be cleaned.

Remove the fi lter from the back of the appliance. 

Use a vacuum to remove dust from the fi lter or wash 

with warm water and mild detergent. Ensure the 

fi lter is completely dry before replacing it in the 

appliance. Press the fi lter button to reset the fi lter 

indicator.

Note:

 Do not operate the appliance without the air 

fi lter installed.

CLEANING

To avoid possible electric shock, ensure that the 

appliance is unplugged before performing any 

cleaning or maintenance. 

The outside of the appliance can be wiped clean 

with a soft cloth or with a lukewarm, damp cloth if 

necessary.

Do not use gasoline, benzene, thinner or any 

other chemicals to clean this appliance as these 

substances can cause damage to the fi nish and 

deformation of plastic parts.

Never pour water directly onto the appliance as this 

will cause deterioration of electrical components 

and wiring insulation.

Ensure that the drain ports on the interior of the 

appliance and the drain ports on the back of the 

appliance are free of dirt and calcium build up.

ERROR CODES

If the display panel shows any of the below error 

codes, unplug the appliance, let it stand for 5-10 

minutes and then plug it back in. If the error 

persists, call for service.

AS 

- Humidity sensor error

ES 

- Temperature sensor error

E3

 - Control panel error

P2

 or 

Eb

 - Bucket is full or not in the correct position

DISPOSAL

This appliance may not be treated as regular 

household waste, it should be taken to the 

appropriate waste collection point for recycling of 

electrical components. Check for local regulatory 

compliance regarding approved and safe disposal 

of this appliance.

LONG TERM STORAGE

Ensure that the inside of the appliance is dry before 

storing for the off season to help avoid the growth 

of mold or mildew. Ensure the fi lter is clean and dry. 

Secure the power cord with the power cord strap as 

per the image below. Store the appliance upright 

and covered in a dry location.

Summary of Contents for DDR050BLPBDB










Reviews: