V3-BTZBE
Danalock V3-BTZBE, Technical Manual v.2.3, February 2019
Page 4
No Poly-control employee, agent or dealer is authorized to
modify, extend or complete the present guarantee in any way.
EXCEPT AS PROVIDED FOR IN THE PRESENT
WARRANTY AND TO THE EXTENT PERMISSIBLE
UNDER APPLICABLE LEGISLATION, POLY-CONTROL
CANNOT BE HELD LIABLE FOR ANY DIRECT, SPECIFIC,
ACCESSORY OR INDIRECT DAMAGE RESULTING FROM
ANY VIOLATION OF ANY WARRANTY OR CONDITION
OR THE TERMS OF ANY OTHER LEGAL CONCEPT
INCLUDING BUT NOT LIMITED TO ANY LOSS OF USE,
REVENUE, PRESENT OR FUTURE LOSS OF PROFIT
(INCLUDING ANY LOSS OF PROFITS RELATED TO
CONTRACTS),
ANY
LOSS
OF
FINANCIAL
WHEREWITHAL, EXPECTED LOSS OF SAVINGS, LOSS
OF
BUSINESS,
OPPORTUNITY,
CLIENTELE,
REPUTATION, OR ANY INDIRECT OR SUBSEQUENT
LOSS OR DAMAGE. THE PRESENT LIMITATION DOES
NOT APPLY TO CLAIMS RELATING TO DEATH OR
INJURY. POLY-CONTROL MAKES NO UNDERTAKING IN
RESPECT OF ITS ABILITY TO REPAIR ANY PRODUCT
UNDER THE TERMS OF THE PRESENT WARRANTY OR
OF THE ABSENCE OF RISK IN THE EVENT OF
EXCHANGE FOR ANOTHER PRODUCT.
FOR CONSUMERS COVERED BY LAWS OR CONSUMER
PROTECTION REGULATIONS IN VARIOUS COUNTRIES
OF PURCHASE OR WHERE DIFFERENT, OF THEIR
COUNTRY OF RESIDENCE, THE BENEFITS OF THE
PRESENT WARRANTY ARE IN ADDITION TO ALL
RIGHTS AND CLAIM FACILITIES PROVIDED BY THESE
LAWS AND CONSUMER PROTECTION REGULATIONS.
Some countries, States and regions do not allow exclusion from
or limitation of indirect and/or subsequent damage for the
duration of the warranty or tacit conditions, in which case the
above exclusions and limitations do not apply to all such
Customers. The present warranty provides the Customer with
specific legal rights; Customers may benefit from additional
rights depending on local legislation.
Embedded Software/Firmware
The Product and associated tools, if any, may contain embedded
software/firmware, which is licensed, not sold, and is only for use
within the Product as an integral part thereof. Such embedded
software/firmware (which includes all updates thereto) contains
valuable trade secrets and is proprietary to Poly-Control ApS and
its suppliers. To the greatest extent permitted by law, such
embedded software/firmware may not be modified, copied,
disassembled, decompiled or reverse engineered. Poly-control
reserves all other rights.
Limitation of Liability
POLY-CONTROL’S ENTIRE LIABILITY REGARDING THE
PRODUCT SHALL BE LIMITED TO THE AMOUNT ACTUALLY
PAID BY RESELLER FOR THE PRODUCT. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL POLY-CONTROL OR ITS SUPPLIERS BE LIABLE FOR
ANY
INDIRECT,
SPECIAL,
INCIDENTAL
OR
CONSEQUENTIAL DAMAGES WHATSOEVER UNDER ANY
CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY
WAY
TO
THE
PRODUCTS,
ACCOMPANYING
DOCUMENTATION AND MATERIALS, AND ANY EMBEDDED
SOFTWARE/FIRMWARE
AND
UPDATES
THERETO
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS
OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF DATA OR ANY OTHER
PECUNIARY LOSS), REGARDLESS OF WHETHER POLY-
CONTROL HAS BEEN ADVISED OF THE POSSIBILITY OF
ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF
DEALING BETWEEN POLY-CONTROL AND RESELLER.
BECAUSE SOME STATES AND JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE
ABOVE LIMITATION MAY NOT APPLY TO EVERY RESELLER
.
Notices
Class B Statement – Notice to Users. This equipment has been
tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communication. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Consult the dealer or an experienced radio/TV technician
for help.
Changes and modifications not expressly approved by the
manufacturer or registrant of this equipment can void your
authority to operate this equipment under Federal
Communications Commission rules.
Regulatory Approvals
CE
The device complies with the essential requirements of the RED
Directive 2014/53/EU as stated by the EC Declaration of
Conformity (CE). The device complies with the European Radio
Equipment Standards Institute Specifications EN 301 489-1 and
EN 301 489-17 (EMC for Bluetooth and Zigbee 2400MHz and
Radio Equipment and Systems) and EN 300 328 for preservation
of the electromagnetic spectrum.
EC/ International
The device complies with the essential requirements of the
2011/65/EC directive on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
FCC/IC
The device product complies with the FCC Part 15.247, part
2.1091 and the Industry Canada requirements RSS-GEN, RSS-
102, RSS-247.
This device complies with Part 15 of the FCC rules it contains
license-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s
license-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation of the device.
For fixed mounted operations the device must be installed to
provide a separation distance of at least 20 cm from all persons.
