V3-BTZBEE
Danalock V3-BTZBE, Technical Manual v.2.3, February 2019
Page 13
Functionality check
LED signals
The V3 series is fitted with a LED that has the following status indications:
Status LED mode
LED color
Status indication
Constant blue till finishes then
one green blink
Lock calibration
!
Constant red light till finishes
Manually lock/unlock when
not calibrated
Constant yellow light till finishes
Lock has been latched
successfully
!
Constant yellow till fails then one
red blink
Lock failed during latch
Constant green light till finishes
Lock has been unlatched
successfully
!
Constant green till fails then one
red blink
Lock failed during unlatch
Constant white for 1 sec
Identification of the lock
!
Red light flashes every 5 minute
Critical battery level
Troubleshooting
Various error situations are listed below along with some possible solutions.
LED
