MOVING THE UNPACKAGED GEAR UNIT
13
Dana Incorporated
IMM-0005EN Posiplan (MT-5215-0806)
MOVING THE UNPACKAGED GEAR UNIT
Before moving it, remove the wood blocks inserted in the packing to hold it stable during shipment. Lift the machine making
sure the load remains balanced during each operation.
STORAGE
If the product is to be stored for more than two months, proceed as follows:
•
Coat the shafts and alignment pins with a film of protective anticorrosion grease or oil.
•
Fill the gear unit full with an appropriate oil (see section 7.4).
•
Store the gear unit in a dry place at a temperature between -5°C and +30°C
•
Protect the packing from dust, dirt and humidity.
Before removing the machine from its packing, make sure it is solidly attached to the lifting equipment so that it cannot slide
or flip over.
NOTE:
When stored for extended periods of more than six months, the rotating seals will deteriorate. It is recommended to
check them periodically, turning the internal gears manually and rotating the input shaft. Replace the gaskets when the
machine is eventually started up.
CAUTION
