DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center Installation Manual Download Page 3

 

 
Installation Guide AX Center

 

 

Doc no. AXCNTR-8001-A-4 

Rev. date 221023 

Page 3 of 19 

The product must be grounded. If it should malfunction or breakdown, grounding provides a path of least 
resistance for electric current to reduce the risk of electric shock. This product is equipped with a power 
supply cord having an equipment-grounding  conductor and a grounding plug. The plug must be plugged 
into an appropriate outlet which is properly installed and grounded in accordance with all local codes and 
ordinances.  

 

WARNING

 

 

This product, either alone or in combination with an amplifier and speakers or headphones, may be capable 
of producing sound levels that could cause permanent hearing loss. Do not operate at a high volume level 
or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should 
consult an audiologist. 

 

The product should be located so that its location or position does not interfere with its proper ventilation. 

 

The power-supply cord of the product should be unplugged from the outlet when left unused for a long 
period of time. When unplugging the power supply, do not pull on the cord, but grasp it by the plug. 

 

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through 
openings. 

 

SERVICE

 

 

Do not attempt to service the product beyond that described in the user maintenance instructions. All 
other servicing should be referred to qualified service personnel. 

 

The product should be serviced by qualified service personnel when:  

1.   The power supply cord or plug has been damaged, or 
2.   Objects have fallen, or liquid has spilled into the product, or 
3.   The product has been exposed to rain, or 
4.   The product does not appear to be operating normally or exhibits a marked change in performance, 

or 

5. The product has been dropped, or the enclosure damaged. 

 

 

WARNING

 – Hazardous moving parts inside the unit. Keep fingers and other body parts away. 

 
 
 
 

 

 

Summary of Contents for NTP TECHNOLOGY DAD THUNDER CORE AX Center




















Reviews: